Dust boot mounting sleeve
€38.70
In stock
Only 9 left
SKU
000000393144910102
Excl. VAT
Mount ATE S-shaped dust boot quickly and easily
The new ATE dust boot mounting sleeves are absolutely mandatory for the current ATE caliper generation for safe pressing on of the S-shaped dust boots. The mounting sleeves are equipped with a special profile that is matched exactly to the S-shaped dust boot. The ATE dust boot mounting sleeves are used with the ATE piston retaining appliance (03.9314-4950.3).
Order no.: 03.9314-4910.1 / 760186
- Diameter, outside: 47.4 mm
- Diameter, inside: 42.8 mm
- Height: 19.6 mm
Order no.: 03.9314-4911.1 / 760187
- Diameter, outside: 52.6 mm
- Diameter, inside: 48.0 mm
- Height: 19.6 mm
Order no.: 03.9314-4912.1 / 760188
- Diameter, outside: 53.6 mm
- Diameter, inside: 49.0 mm
- Height: 19.6 mm
Order no.: 03.9314-4913.1 / 760189
- Diameter, outside: 57.6 mm
- Diameter, inside: 53.2 mm
- Height: 19.6 mm
Order no.: 03.9314-4914.1 / 760190
- Diameter, outside: 61.6 mm
- Diameter, inside: 56.8 mm
- Height: 19.6 mm
Order no.: 03.9314-4915.1 / 760191
- Diameter, outside: 63.6 mm
- Diameter, inside: 58.9 mm
- Height: 19.6 mm
Order no.: 03.9314-4916.1 / 760192
- Diameter, outside: 69.6 mm
- Diameter, inside: 64.8 mm
- Height: 19.6 mm
Order no.: 03.9314-4917.1 / 760193
- Diameter, outside: 72.6 mm
- Diameter, inside: 67.7 mm
- Height: 19.6 mm
Order no.: 03.9314-4918.1 / 760194
- Diameter, outside: 75.5 mm
- Diameter, inside: 70.8 mm
- Height: 19.6 mm
Order no.: 03.9314-4919.1 / 760195
- Diameter, outside: 81.6 mm
- Diameter, inside: 76.9 mm
- Height: 19,6 mm
Technical specifications |
|
---|